Almohadilla de pulido de resina de 3" - Grano 200

- Mid-low grit resin polishing pad for the second resin step on detail work — 200 grit follows the 50- and 100-grit pads in the standard resin progression, removing the scratch pattern from the coarser resin steps and continuing the transition toward a polished surface. The 3" size is the standard format for detail polishing, countertop edges, stair nosings, integral coves, and any work too small or precise for a 5" or 7" pad.

- Compact 3" diameter for the tightest detail areas — the 3" footprint is engineered for spots where even a 5" pad can't reach: tight inside corners, narrow recessed bands, around plumbing penetrations, on countertop edges and bullnoses, and on stair treads. The smaller pad face also gives finer operator control, important as the resin sequence progresses toward final gloss.

- Wet/Dry resin-bonded construction — diamonds are bonded in a resin matrix that wears progressively to keep fresh cutting points exposed. Usable wet or dry: wet polishing reduces heat and extends pad life, dry polishing is more convenient for small detail work without water access.

- Requires a 3" backing pad with hook-and-loop attachment — the standard mount is a 5/8"-11 threaded backer for hand polishers, or an M14 backer for grinders with metric spindles. The backer's diameter must match the pad's diameter — never run a 3" pad on a 4" or 5" backer (exposed hook-and-loop at high RPM is a safety hazard). Most variable-speed hand polishers run 3" pads optimally in the 1,500–3,000 RPM range.

- The honing-pad step for densifier application on detail areas — per industry guidance, 200 grit is the recommended pad for "honing" the surface into shape before applying a densifier or hardener. The slightly opened surface profile allows even densifier penetration without leaving deep scratches that finer pads would struggle to remove. On a 3" pad, this is the matching step for the perimeter and detail areas — both the main floor and the edges must hit 200 grit before densifier is applied to keep gloss development uniform across the whole slab.