Segmento doble de metal de flecha de grano 6 - Unión media - Derecha

- The most aggressive metal-bond grinding segment in arrow geometry — 6 grit goes below the standard 16-grit "coarsest" tier, designed for extreme stock removal where even a 16 grit isn't fast enough. Tears through the thickest coatings, heavy industrial mastic, multi-layer epoxy overlays, severe surface deformities, and badly damaged or contaminated slabs that need significant material removed before a normal grinding sequence can begin.

- Arrow segment geometry for maximum production speed — the arrow-shaped segments are slanted at an angle that lets the tool scrape and grind simultaneously, delivering an aggressive cut while the angled leading edge sweeps debris away from the work area. Arrow segments are specifically engineered to push through coatings, glue, and tough surface material faster than standard rectangular or button segments at the same grit. At 6 grit, the arrow's sweeping action is what keeps the tool from loading up on heavy debris.

- "Right" = clockwise rotation — direction matters — arrow segments are direction-locked: the angled leading edge cuts during rotation in one specific direction only. Right-rotation tools are for grinders that spin clockwise (viewed from above). Critical rule for planetary / rotary grinders with counter-rotating heads: order half right and half left to balance the machine. Running all same-direction arrow segments on a counter-rotating machine causes severe walking, unbalanced cut, and accelerated tool wear.

- Double-segment configuration for tool life on extreme prep — two diamond segments per shoe create more surface contact than a single segment, extending tool life and stabilizing the cut. Best paired with larger / heavier walk-behind grinders (25" and up) where the extra contact patch and weight help the segment cut effectively at this coarse a grit. Medium bond is balanced for typical commercial and residential slabs (3,000–5,000 PSI, Mohs 5–6) — the default choice when slab hardness is unknown.

- Specialist tool for severe prep with heavy coatings — most jobs start at 16 or 25 grit. Reach for 6-grit arrow segments only when the floor combines extreme conditions: thick coatings, glue, mastic, or major stock removal where the arrow's debris-sweeping geometry is needed. Leaves a deep scratch pattern by design — plan for follow-up grinding through 16, 25/30, 50, 80, and 100-grit metals before transitioning to resin pads. Skipping steps after a 6-grit cut leaves a scratch pattern that resin pads cannot remove.