DiamaPro 7" Wet/Dry Honeycomb Pad, 100 grit

- Coarse-grit resin polishing pad for the early resin sequence — 100 grit follows the 50-grit honeycomb pad in the standard resin progression, removing the scratch pattern left by the coarsest resin step and refining the surface toward a uniform finish. Part of DiamaPro Systems' resin polishing pad line, calibrated for cutting speed and tool life.

- Flexible honeycomb resin design for even pressure and dust evacuation — the hexagonal pattern molded into the pad's face creates large channels that evacuate dust during dry use and water during wet use, preventing the diamond surface from loading up. The honeycomb structure also flexes around contours and lippage, maintaining consistent contact pressure across the entire pad face — important for an even scratch pattern before progressing to finer grits.

- Wet/Dry dual-mode operation — usable in either condition: wet polishing reduces heat and extends pad life, dry polishing is more convenient on job sites without water access. Note: a backing pad with hook-and-loop attachment is required to mount this pad to a 7" hand grinder or stand-up edger. Compatible with most 7" handheld grinders and stand-up edge machines.

- Critical category distinction: resin pad, not metal segment — honeycomb pads are resin-bonded and run after the metal-bond grinding sequence is complete. A typical concrete polishing progression: metal-bond grinding (16/25/40/80 grit) → transitional / hybrid diamonds → resin polishing pads (50, 100, 200, 400, 800, 1500, 3000). The 100-grit step is also a common starting point on older floors that don't need the deeper cut of a 50-grit pad.

- The "old floor restoration" starting point — per industry guidance, 100 grit is the recommended starting pad when revitalizing an older or moderately worn polished floor that doesn't need full re-grinding. The pad removes surface scuffs and light wear without dropping back to the metal-bond stage, making it the "minor restoration" entry point in the polishing arsenal. Pairs naturally with the 200-grit honing step before densifier application.